Construction

Formwork For A Concrete Pour

This 6 page SWMS details how to safely cut and set formwork made from formply so you can conduct a concrete pour. details … ]
$39.95
First published: 2013-01-07
Last updated: 2013-01-07
Formwork For A Concrete Pour

Operating Vacuum Truck For Non-Destructive Excavation

This 20 page SWMS details how to safely Operate a Vacuum Truck to conduct non-destructive excavation, including setup, excavation & potholing, drainage/sewer jetting, confined spaces work, emptying and cleaning the tank. details … ]
$99.95
First published: 2013-01-07
Last updated: 2013-01-07
Operating Vacuum Truck For Non-Destructive Excavation

Bricklaying / Blocklaying

This 8 page SWMS details how to lay bricks or blocks safely details … ]
$69.95
First published: 2010-04-06
Last updated: 2010-04-06
Bricklaying / Blocklaying

Cleaning Amenities

This 6 page SWMS details the procedures on safely cleaning site amenities. details … ]
$69.95
First published: 2010-04-06
Last updated: 2010-04-06
Cleaning Amenities

Concreting Footings

This 6 page SWMS details how to safely concrete and finish footings. details … ]
$69.95
First published: 2010-04-06
Last updated: 2010-04-06
Concreting Footings

Concreting Piers

This 6 page SWMS details how to safely concrete and finish piers. details … ]
$69.95
First published: 2010-04-06
Last updated: 2010-04-06
Concreting Piers

Core Drilling and Cutting

This 7 page SWMS details how to safely core drill or cut into concrete, precast concrete, brick and other masonry. details … ]
$69.95
First published: 2010-04-06
Last updated: 2010-04-06
Core Drilling and Cutting

Cutting Doorway into Precast Concrete Panel

This 8 page SWMS details how to safely cut a doorway into precast concrete panel. details … ]
$69.95
First published: 2010-04-07
Last updated: 2010-04-07
Cutting Doorway into Precast Concrete Panel

Dewatering Jobsite

This 9 page SWMS details how to safely remove, relocate, and treat water off a job site after rain or an unwanted water discharge. details … ]
$69.95
First published: 2010-04-07
Last updated: 2010-04-07
Dewatering Jobsite

Drilling and Cutting Screw Piles

This 13 page SWMS details how to drill a screw pile using a drilling rig and then cutting off the screw pile once at the desired height. details … ]
$69.95
First published: 2010-04-07
Last updated: 2010-04-07
Drilling and Cutting Screw Piles

Drilling Piers with Drill Rig

This 6 page SWMS details how to drill pier holes using a drilling rig and then covering the holes to prevent injury. details … ]
$69.95
First published: 2010-04-07
Last updated: 2010-04-07
Drilling Piers with Drill Rig

Erecting Timber House Frames

This 12 page SWMS details how to safely erect timber house frames on 1 storey and 2 storey houses. Including use of explosive power tools, cranage of frames to upper level, roof trusses and masonite bracing. details … ]
$69.95
First published: 2010-04-09
Last updated: 2010-04-09
Erecting Timber House Frames

Excavate, Load and Cart Material Off Site

This 10 page SWMS details how to safely Excavate, Load and Cart Material Off Site using an excavator. details … ]
$69.95
First published: 2010-04-09
Last updated: 2010-04-09
Excavate, Load and Cart Material Off Site

Excavation of Footings

This 10 page SWMS details how to safely Excavate Footings on site including excavation near services, truck movements, working around an excavated area, protecting and excavation and unanticipated finds such as contaminated materials or asbestos. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Excavation of Footings

Excavation Works

This 10 page SWMS details how to safely conduct excavation works on site including excavation near services, truck movements, working around an excavated area, protecting and excavation and unanticipated finds such as contaminated materials or asbestos. details … ]
$69.95
First published: 2010-04-09
Last updated: 2010-04-09
Excavation Works

Felling and Clearing Trees with an Excavator

This 9 page SWMS details how to safely Fell and Clear Trees with an Excavator, including operating plant, overhead hazards, plant and pedestrian safety. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Felling and Clearing Trees with an Excavator

Fit Out of House or Office [Skirting Architraves and Doors Jambs]

This 6 page SWMS details the safe Fit Out of Skirting, Architraves and Doors Jambs into a House or Office, including set up, use of ladder or scaffold, cutting and fitting materials. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Fit Out of House or Office [Skirting Architraves and Doors Jambs]

Formwork

This 7 page SWMS details how to safely erect formwork involving frame jacks, frames, bearers, decking and dismantling the formwork. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Formwork

General Labouring

This 6 page SWMS details how to safely conduct General Labouring, including sizing up a load, assessing travel path, positioning, preparing your lift, lifting, carrying, lowering, use of trolleys / wheel barrows, working in hot environments and more. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
General Labouring

General Working On A Construction Site

This 6 page SWMS details General Hazards found on a Construction Site and how to safely control them, including manual handling, hot weather, hot surfaces, noise, other contractors in close proximity, refuelling plant, hazardous substances and more. details … ]
$29.95
First published: 2010-04-17
Last updated: 2010-04-17
General Working On A Construction Site

Gyprocking

This 7 page SWMS details the safe installation of Gyprock Sheets into a building, including set up, use of ladder or scaffold, cutting and fixing gyprock, mixing plaster, setting joints and cleanup. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Gyprocking

Importing and Placing Material or Soil on to Site

This 8 page SWMS details how to safely Import and Place Material or Soil on to site including delivery and unloading material, compacting fill with a compactor. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Importing and Placing Material or Soil on to Site

Installation of Metal Wall Cladding

This 5 page SWMS details the safe installation of Metal Wall Cladding, including use elevated work platform, installing wall mesh, insulation and wall cladding. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Metal Wall Cladding

Installation of Alarm CCTV and Access Control Systems

This 7 page SWMS details the Installation of Alarm, CCTV and Access Control Systems safely into a building. details … ]
$69.95
First published: 2010-04-06
Last updated: 2010-04-06
Installation of Alarm CCTV and Access Control Systems

Installation of Aluminium Windows Doors and Louvers

This 7 page SWMS details the safe installation of Aluminium Windows Doors and Louvers onto a building, including set up, use of ladder or scaffold, working from an elevated work platform, cutting and installation of channels, installing and sealing glass. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Aluminium Windows Doors and Louvers

Installation Of Barricades and Bunting

This 6 page SWMS details the Installation of Barricades & Bunting to secure hazards on site. details … ]
$69.95
First published: 2010-04-06
Last updated: 2010-04-06
Installation Of Barricades and Bunting

Installation of Chain Link Fence

This 8 page SWMS details the safe installation of a Chain Link Fence including, refuelling and operating a post hole digger, clearing holes manually, placing fence posts, pouring concrete, cutting chain link, securing chain link and barbed wire. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Chain Link Fence

Installation of Eaves and Eave Linings

This 6 page SWMS details the safe installation of Eaves and Eave Linings onto a building, including set up, use of ladder or scaffold, cutting and fitting materials. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Eaves and Eave Linings

Installation of Fire Sprinkler System

This 7 page SWMS details the safe installation of Fire Sprinkler Systems to buildings, including set up, working from an elevated work platform, cutting pipe, threading pipe with a thread machine, and installing hangers, brackets and pipes. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Fire Sprinkler System

Installation of Flagpole

This 7 page SWMS details the safe installation of a flagpole onto a job site, including excavating footing, pouring concrete footing, placing hold down bolts, craning and securing the flagpole. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Flagpole

Installation of Floating Ceiling

This 6 page SWMS details the safe installation of a Floating Ceiling during a building fit out, including set up, use of ladder or scaffold, installing ceiling hangers and ceiling grid, cutting and installing panels and cleanup. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Floating Ceiling

Installation of Hand Rails

This 7 page SWMS details the safe installation of Hand Rails into a building or stairwell including use of ladder or scaffold, working from an elevated work platform, drilling, cutting, welding, installing hand rails and grinding / finishing. - details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Hand Rails

Installation of Metal Fascia Gutter Systems and Downpipes

This 12 page SWMS details the safe installation of Metal Fascia Gutter Systems and Downpipes to buildings, including working on scaffold, cutting, securing brackets, hanging materials, sealing corners / stopends, and installation of valleys. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Metal Fascia Gutter Systems and Downpipes

Installation of Roller Doors

This 7 page SWMS details the safe installation of roller doors onto a building, including use of ladders or scaffold, use of elevated work platform, welding brackets, installing roller drum, curtain and slide guides. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Roller Doors

Installation of Roller Shutters

This 6 page SWMS details the safe installation roller shutters onto a building, including use of ladders or scaffold, installing brackets, roller, curtain and slide guides. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Roller Shutters

Installation of Signs

This 6 page SWMS details the safe installation of Signs onto buildings or around site, including working on an elevated work platform, fixing signs with silicone sealant and fixing signs with screws. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Signs

Installation of Silt Fencing by Hand [Sediment Controls]

This 5 page SWMS details the safe installation of Silt Fencing by Hand (Sediment Controls). details … ]
$29.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Silt Fencing by Hand [Sediment Controls]

Installation of Silt Fencing by Machine [Sediment Controls]

This 10 page SWMS details the safe installation of Silt Fencing by Excavator, Backhoe, Bobcat or Dtichwitch, including clearing, excavation and installation of Silt Fencing (Sediment Controls). details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Silt Fencing by Machine [Sediment Controls]

Installation of Stud Partitions

This 7 page SWMS details the safe installation of Steel Stud Partitions during a building fit out, including set up, use of ladder or scaffold, cutting tracks and studs, laying tracks, erecting studs and cleanup. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Stud Partitions

Installation of Temporary Fencing

This 5 page SWMS details the safe installation of Temporary Fencing around a job site, including laying blocks/feet, installing and securing fence panels details … ]
$29.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Temporary Fencing

Installation of Toilet Partitioning

This 6 page SWMS details the safe installation of toilet partitions into a bathroom, including set up, use of ladder or mobile scaffold and installing partitions. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Installation of Toilet Partitioning

Keystone or Crib Wall Construction

This 9 page SWMS details how to safely construct a Keystone Wall or Crib Wall including pouring the strip footings, relocating materials, laying blocks, cutting blocks, back filling wall and compacting back fill with an upright compactor. details … ]
$69.95
First published: 2010-04-17
Last updated: 2010-04-17
Keystone or Crib Wall Construction

Location of Underground Services By Potholing

This 10 page SWMS details how to safely Locate Underground Services by Potholing with an Excavator and Hand Tools, including plant inspection, work area inspection, use of shovel, back filling, and unanticipated contaminated materials (eg. Asbestos details … ]
$69.95
First published: 2010-04-15
Last updated: 2010-04-15
Location of Underground Services By Potholing

Operating a Backhoe

This 10 page SWMS details how to safely Operate a Backhoe, including plant inspection, work area inspection, working around excavated area, unauthorised access into area and unanticipated contaminated materials (eg. Asbestos). details … ]
$69.95
First published: 2010-04-15
Last updated: 2010-04-15
Operating a Backhoe

Operating a Concrete Boom Pump

This 8 page SWMS details how to safely Operate a Concrete Boom Pump, including plant inspection, work area inspection, overhead hazards, line cleaning, pouring and finishing concrete. details … ]
$69.95
First published: 2010-04-15
Last updated: 2010-04-15
Operating a Concrete Boom Pump

Operating a Concrete Line Pump

This 8 page SWMS details how to safely Operate a Concrete Line Pump, including plant inspection, work area inspection, line cleaning, pouring and finishing concrete. details … ]
$69.95
First published: 2010-04-15
Last updated: 2010-04-15
Operating a Concrete Line Pump

Operating a Elevated Work Platform

This 8 page SWMS details how to safely Operate a Elevated Work Platform including plant inspection, work area inspection, use of the plant, and Elevated Work Platform Rescue Procedure. details … ]
$69.95
First published: 2010-04-15
Last updated: 2010-04-15
Operating a Elevated Work Platform

Operating a Forklift

This 8 page SWMS details how to safely Operate a Forklift including plant inspection, work area inspection and use of plant. details … ]
$69.95
First published: 2010-04-15
Last updated: 2010-04-15
Operating a Forklift

Painting Using an Elevated Work Platform

This 6 page SWMS details how to safely paint using an Elevated Work Platform, including elevated work platform emergency procedures, sanding and preparing surfaces and clean up. details … ]
$69.95
First published: 2010-04-15
Last updated: 2010-04-15
Painting Using an Elevated Work Platform

Painting - General

This 6 page SWMS details how to safely paint, including use of ladders, mobile scaffolds, sanding and preparing surfaces and clean up. details … ]
$29.95
First published: 2010-04-15
Last updated: 2010-04-15
Painting - General

Removal of Asbestos Contaminated Soil With Backhoe or Excavator

This 10 page SWMS details how to safely remove Bonded Asbestos Contaminated Soil with a Backhoe or Excavator from a job site. details … ]
$99.95
First published: 2010-04-15
Last updated: 2010-04-15
Removal of Asbestos Contaminated Soil With Backhoe or Excavator

Removal of Bonded Asbestos from Eaves and Fascia from a Building

This 13 page SWMS details how to safely remove Bonded Asbestos Sheeting from a Buildings Eaves and Fascia. details … ]
$99.95
First published: 2010-04-15
Last updated: 2010-04-15
Removal of Bonded Asbestos from Eaves and Fascia from a Building

Sandstone Rock Retaining Wall Construction

This 11 page SWMS details how to safely construct a rock retaining wall with sandstone blocks using an excavator. It includes safe operation of plant, working near excavations, shaping rocks and placing rocks as a rock retaining wall. details … ]
$69.95
First published: 2010-04-14
Last updated: 2010-04-14
Sandstone Rock Retaining Wall Construction

Servicing and Maintenance of Plant

This 11 page SWMS details Servicing and Maintenance of Plant. details … ]
$99.95
First published: 2010-04-14
Last updated: 2010-04-14
Servicing and Maintenance of Plant

Site Environmental Controls

This 6 page SWMS details various site environmental controls. details … ]
$69.95
First published: 2010-04-07
Last updated: 2010-04-07
Site Environmental Controls

Steel Fixing, Formwork, Pouring Concrete, Slabs, Driveways and Laybacks

This 8 page SWMS details how to safely set up, place sand, water poof membranes, edge boards, base discs, support chairs, steel mesh, tying steel mesh, pouring and finishing concrete. details … ]
$69.95
First published: 2010-04-14
Last updated: 2010-04-14
Steel Fixing, Formwork, Pouring Concrete, Slabs, Driveways and Laybacks

Steel Fixing

This 6 page SWMS details how to safely set up, cut reo-bars, place reo-bars or mesh and tie the reo-bars or mesh. details … ]
$69.95
First published: 2010-04-14
Last updated: 2010-04-14
Steel Fixing

Surveying

This 7 page SWMS details how to safely, drive your vehicle, set up traffic control, loading and unloading your vehicle, undertaking field surveying work and using aerosol paint. details … ]
$69.95
First published: 2010-04-14
Last updated: 2010-04-14
Surveying

Sweeping Use of Broom

This 5 page SWMS details how to safely sweep floors or water using a broom controlling the main hazards that would cause an injury such as strains, back injury and manual handling injury. details … ]
$29.95
First published: 2010-04-14
Last updated: 2010-04-14
Sweeping Use of Broom

Tiling Floors and Walls

This 8 page SWMS details how to safely set up, water proof, lay tile bed, mix adhesive, lay tiles, cut tiles and grout. Also included is ladder and scaffold safety. details … ]
$69.95
First published: 2010-04-14
Last updated: 2010-04-14
Tiling Floors and Walls

Traffic Control

This 6 page SWMS details how to safely set up, work among traffic and removed traffic control, including working at night and working in hot environments. details … ]
$69.95
First published: 2010-04-14
Last updated: 2010-04-14
Traffic Control

Use of Aerosol Paint

This 5 page SWMS details how to safely use Aerosol Paint to make markings around the job site . details … ]
$29.95
First published: 2010-04-13
Last updated: 2010-04-13
Use of Aerosol Paint

Use of Air Compressor - Electric

This 5 page SWMS details how to safely set up, check and operate an electric Air Compressor including protection of the user and others in work area. details … ]
$69.95
First published: 2010-04-13
Last updated: 2010-04-13
Use of Air Compressor - Electric

Use of Air Compressor - Petrol Powered

This 6 page SWMS details how to safely set up, check, refuel and operate a petrol powered Air Compressor including protection of the user and others in work area. details … ]
$69.95
First published: 2010-04-13
Last updated: 2010-04-13
Use of Air Compressor - Petrol Powered

Use of Concrete Mixer - Electric

This 6 page SWMS details how to safely set up, check and operate an electric Concrete Mixer. It includes mixing concrete and electrical safety during clean up. details … ]
$69.95
First published: 2010-04-13
Last updated: 2010-04-13
Use of Concrete Mixer - Electric

Use of Concrete Mixer - Petrol Powered

This 6 page SWMS details how to safely set up, check, refuel and operate a petrol powered Concrete Mixer. It includes mixing concrete and clean up. details … ]
$69.95
First published: 2010-04-13
Last updated: 2010-04-13
Use of Concrete Mixer - Petrol Powered

Use of Cut Off Saw [Demolition Saw] - Electric

This 5 page SWMS details how to safely set up, check and operate an electric Cut Off Saw sometimes called a Demolition Saw. details … ]
$69.95
First published: 2010-04-13
Last updated: 2010-04-13
Use of Cut Off Saw [Demolition Saw] - Electric

Use of Cut Off Saw [Demolition Saw] - Petrol Powered

This 7 page SWMS details how to safely set up, check, refuel and operate a petrol powered Cut Off Saw sometimes called a Demolition Saw. It includes protection of user and others in work area as well as a pictorial indication of how NOT to start the saw. details … ]
$69.95
First published: 2010-04-13
Last updated: 2010-04-13
Use of Cut Off Saw [Demolition Saw] - Petrol Powered

Use of Electric Drill

This 5 page SWMS details how to safely set up, check and use an electric hand held Drill, including changing of drill bits. details … ]
$69.95
First published: 2010-04-12
Last updated: 2010-04-12
Use of Electric Drill

Use of Electric Grinder

This 6 page SWMS details how to safely set up, check and use an electric hand held Grinder, including changing of grinding discs. details … ]
$69.95
First published: 2010-04-12
Last updated: 2010-04-12
Use of Electric Grinder

Use of a Electric Power Saw

This 7 page SWMS details how to safely set up, check and use an electric hand held Power Saw, including checks between cuts and changing of blades. details … ]
$69.95
First published: 2010-04-12
Last updated: 2010-04-12
Use of a Electric Power Saw

Use of a Electric Reo Bar Bender

This 5 page SWMS details how to safely set up, check and use an Electric Reo Bar Bender. details … ]
$69.95
First published: 2010-04-12
Last updated: 2010-04-12
Use of a Electric Reo Bar Bender

Use of Explosive Power Tools

This 8 page SWMS details how to safely unpack, set up, load, check and use an Explosive Power Tool, including misfire procedures, problems when nails dont go deep enough, cleaning, maintenance, storage of EPT and storage of EPT charges. details … ]
$99.95
First published: 2010-04-12
Last updated: 2010-04-12
Use of Explosive Power Tools

Use of Extension Leads

This 5 page SWMS details how to safely set up, check and use Extension Leads including setting up lead stands and running out the leads. details … ]
$29.95
First published: 2010-04-12
Last updated: 2010-04-12
Use of Extension Leads

Use of Generators

This 6 page SWMS details how to safely set up, check, refuel and operate a petrol powered Generator. details … ]
$69.95
First published: 2010-04-12
Last updated: 2010-04-12
Use of Generators

Use of Jackhammer - Compressed Air Powered

This 6 page SWMS details how to safely set up, check and use a compressed air powered Jackhammer, including refuelling, checking and set up of air compressor. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Jackhammer - Compressed Air Powered

Use of Jackhammer - Electric

This 5 page SWMS details how to safely set up, check and operate an electric Jackhammer. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Jackhammer - Electric

Use of Mobile Scaffold - Erection, Moving and Dismantling

This 7 page SWMS details how to safely erect, check, move, dismantle and use a Mobile Scaffold, including base frames, 2nd level frames, bracing kick panels, edge protection and access ladder. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Mobile Scaffold - Erection, Moving and Dismantling

Use of Nail Gun - Compressed Air Powered

This 6 page SWMS details how to safely set up, check and use a compressed air powered Nail Gun, including checking and set up of air compressor. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Nail Gun - Compressed Air Powered

Use of Nail Gun - Electric

This 5 page SWMS details how to safely set up, check and use an electric nail gun. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Nail Gun - Electric

Use of a Oxy Acetylene Torch to Heat, Cut or Weld an Object

This 7 page SWMS details how to safely use a Oxy Acetylene Torch to heat, cut or weld an object. It also details bottle checks, valve checks, line checks as well as protecting other working in the area. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of a Oxy Acetylene Torch to Heat, Cut or Weld an Object

Use of Plate Compactor to Compact Soil or Material

This 6 page SWMS details how to safely set up, check, refuel and operate a petrol powered plate compactor to compact soil or material. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Plate Compactor to Compact Soil or Material

Use of Power Screed to Level Concrete

This 6 page SWMS details how to safely set up, check, refuel and operate a petrol power screed to level and finish freshly poured concrete. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Power Screed to Level Concrete

Use of Sandbag Filler or Sandbag Hopper

This 5 page SWMS details how to safely use a sandbag filler or otherwise known as a sandbag hopper, a device that you place sand into the top and a foot operated gate controls how much sad is dispensed into the sandbag. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Sandbag Filler or Sandbag Hopper

Use of Shovel

This 5 page SWMS details how to safely use a shovel controlling the main hazards that would cause an injury such as strains, back injury and manual handling injury. details … ]
$29.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Shovel

Use of Staple Gun - Electric

This 5 page SWMS details how to safely use an electrically powered staple gun details … ]
$29.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Staple Gun - Electric

Use of Upright Compactor [Wakka Pakka, Kanga] to Compact Soil or Material

This 6 page SWMS details how to safely use an Upright Compactor (sometimes called Wakka Pakka, or Kanga) to compact soil or material. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Upright Compactor [Wakka Pakka, Kanga] to Compact Soil or Material

Use of MIG Welder

This 6 page SWMS details how to safely use a MIG welder and protect others working in the area. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of MIG Welder

Use of TIG Welder

This 6 page SWMS details how to safely use a TIG welder as well as protecting other working in the area. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of TIG Welder

Use of Wheel Barrow

This 5 page SWMS details how to safely use a wheel barrow controlling the main hazards that would cause an injury such as strains, back injury and falls. details … ]
$29.95
First published: 2010-04-11
Last updated: 2010-04-11
Use of Wheel Barrow

Vibrating Concrete [removal of air bubbles] with a Concrete Vibrator

This 6 page SWMS details how to safely remove the air bubbles within freshly poured concrete with a concrete vibrator. This SWMS includes refuelling the machine as well as working amongst moving concrete trucks. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Vibrating Concrete [removal of air bubbles] with a Concrete Vibrator

Working At Heights

This 5 page SWMS lists the steps involved in working at heights using a harness an existing safety line system. details … ]
$29.95
First published: 2010-04-11
Last updated: 2010-04-11
Working At Heights

Working Near Deep Excavations

This 5 page SWMS details how to safely work around deep excavations. How to stockpile near excavations as well as protecting the excavation with barriers at the end of works. details … ]
$29.95
First published: 2010-04-11
Last updated: 2010-04-11
Working Near Deep Excavations

Working Near Overhead Power Lines With Plant & Equipment

This 6 page SWMS details how to safely work near over head power lines while operating plant & equipment. It details the safe working distances, working within an transmission line easement and other various safety controls. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Working Near Overhead Power Lines With Plant & Equipment

Working On Ladders

This 6 page SWMS details how to safely work on ladders on a construction site. details … ]
$69.95
First published: 2010-04-11
Last updated: 2010-04-11
Working On Ladders